Menu
0
0

Your Cart is Empty

Previous | Next
Home / HydraMaster Parts / HydraMaster 950-777-B | HydraStone | 4 X 1 Gallon Case | PH 11.9-12.5
HydraMaster 950-777-B | HydraStone | 4 X 1 Gallon Case | PH 11.9-12.5
HydraMaster 950-777-B | HydraStone | 4 X 1 Gallon Case | PH 11.9-12.5
HydraMaster 950-777-B | HydraStone | 4 X 1 Gallon Case | PH 11.9-12.5
HydraMaster 950-777-B | HydraStone | 4 X 1 Gallon Case | PH 11.9-12.5

HydraMaster 950-777-B | HydraStone | 4 X 1 Gallon Case | PH 11.9-12.5

$140.74
Hydramaster HydraStone 
Applications
  • HydraStone was specifically made to safely and effectively clean stone and tile surfaces, unlike most hard surface cleaners that contain water conditioning agents and harsh solvents that can actually etch and damage fine stone.
Product Attributes 
  • Boiling range- 212 degrees
  • Solubility in water- 100%
  • Physical description- Clear colorless liquid with mild odor 
  • PH- 11.9-12.5 as is 
Dilution
  • Please read the full label directions before cleaning.
  • Sweep or vacuum floors prior to deep cleaning to remove particulate soils. An untreated microfiber dust mop works well for this.
  • For normal soiling, Mix 1 part HydraStone with 16 parts water into sprayer (8 ounces of solution/gallon of water). For heavy soiling, mix 1 part HydraStone with 8 parts water 16 ounces of solution/gallon of water). For maintenance cleaning of counter tops and other surfaces, mix 1 part HydraStone with 32 parts water (4oz of solution/gallon of water)
  • Apply with sprayer or mop
  • Allow several minutes of dwell time but do not allow solution to dry.
  • Grout lines may need to be agitated with a grout brush.
  • For best results, agitate and extract cleaning solution using high pressure warm or hot water from a RX20 with a hard surface attachment, hard surface rotary extraction tool or high pressure hard surface wand. Your portable or Truckmounted extractor should maintain a minimum of 800 psi and a maximum of 1200 psi. For more sensitive surfaces, consider using a hard surface wand or simply mop with clean water and rinse.
  • For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.
  • After the floor has dried, consider the
    need for application of HydraSeal
Key Benefits
  • HydraStone is designed to deep clean and restoratively clean marble, granite, limestone, travertine, slate & sandstone as well as ceramic, porcelain and quarry tile & grout. It also works to effectively dissolve and emulsify stubborn soils on masonry and concrete.
  • HydraStone is designed to be applied as a prespray/pretreatmentspray to loosen, dissolve, break down and emulsify built-up soiling, and to assist in stain removal. It is the ideal stone and tile cleaner for stone and tile surfaces that have been affected by smoke and soot damage following a fire or furnace puff-back.
Packaging Sizes
  • 4 X 1 Gallon Case 
Ideal Users
  • Commercial or residential applications 
  • Pre-treat floors being cleaned by an autoscrubber, in a mop and rinse system or used in conjuction with a high pressure/spinner tool system 
Target Markets
  • Applications with ceramic, porcelain, and quarry tile floors and their grout lines
  • Can be used on residential or commercial tile floors and other hard surfaces, indoors and outdoors
  • It cleans porous grout lines without the use of harsh acids.
Product Information

 

   

 

Machine Fitment

Item Number Matches

Description
Hydramaster HydraStone 
Applications
  • HydraStone was specifically made to safely and effectively clean stone and tile surfaces, unlike most hard surface cleaners that contain water conditioning agents and harsh solvents that can actually etch and damage fine stone.
Product Attributes 
  • Boiling range- 212 degrees
  • Solubility in water- 100%
  • Physical description- Clear colorless liquid with mild odor 
  • PH- 11.9-12.5 as is 
Dilution
  • Please read the full label directions before cleaning.
  • Sweep or vacuum floors prior to deep cleaning to remove particulate soils. An untreated microfiber dust mop works well for this.
  • For normal soiling, Mix 1 part HydraStone with 16 parts water into sprayer (8 ounces of solution/gallon of water). For heavy soiling, mix 1 part HydraStone with 8 parts water 16 ounces of solution/gallon of water). For maintenance cleaning of counter tops and other surfaces, mix 1 part HydraStone with 32 parts water (4oz of solution/gallon of water)
  • Apply with sprayer or mop
  • Allow several minutes of dwell time but do not allow solution to dry.
  • Grout lines may need to be agitated with a grout brush.
  • For best results, agitate and extract cleaning solution using high pressure warm or hot water from a RX20 with a hard surface attachment, hard surface rotary extraction tool or high pressure hard surface wand. Your portable or Truckmounted extractor should maintain a minimum of 800 psi and a maximum of 1200 psi. For more sensitive surfaces, consider using a hard surface wand or simply mop with clean water and rinse.
  • For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.
  • After the floor has dried, consider the
    need for application of HydraSeal
Key Benefits
  • HydraStone is designed to deep clean and restoratively clean marble, granite, limestone, travertine, slate & sandstone as well as ceramic, porcelain and quarry tile & grout. It also works to effectively dissolve and emulsify stubborn soils on masonry and concrete.
  • HydraStone is designed to be applied as a prespray/pretreatmentspray to loosen, dissolve, break down and emulsify built-up soiling, and to assist in stain removal. It is the ideal stone and tile cleaner for stone and tile surfaces that have been affected by smoke and soot damage following a fire or furnace puff-back.
Packaging Sizes
  • 4 X 1 Gallon Case 
Ideal Users
  • Commercial or residential applications 
  • Pre-treat floors being cleaned by an autoscrubber, in a mop and rinse system or used in conjuction with a high pressure/spinner tool system 
Target Markets
  • Applications with ceramic, porcelain, and quarry tile floors and their grout lines
  • Can be used on residential or commercial tile floors and other hard surfaces, indoors and outdoors
  • It cleans porous grout lines without the use of harsh acids.
Product Information

 

   

 

This product is part of the following parts collections:

This product is part of the following parts collections:

Description
Hydramaster HydraStone 
Applications
  • HydraStone was specifically made to safely and effectively clean stone and tile surfaces, unlike most hard surface cleaners that contain water conditioning agents and harsh solvents that can actually etch and damage fine stone.
Product Attributes 
  • Boiling range- 212 degrees
  • Solubility in water- 100%
  • Physical description- Clear colorless liquid with mild odor 
  • PH- 11.9-12.5 as is 
Dilution
  • Please read the full label directions before cleaning.
  • Sweep or vacuum floors prior to deep cleaning to remove particulate soils. An untreated microfiber dust mop works well for this.
  • For normal soiling, Mix 1 part HydraStone with 16 parts water into sprayer (8 ounces of solution/gallon of water). For heavy soiling, mix 1 part HydraStone with 8 parts water 16 ounces of solution/gallon of water). For maintenance cleaning of counter tops and other surfaces, mix 1 part HydraStone with 32 parts water (4oz of solution/gallon of water)
  • Apply with sprayer or mop
  • Allow several minutes of dwell time but do not allow solution to dry.
  • Grout lines may need to be agitated with a grout brush.
  • For best results, agitate and extract cleaning solution using high pressure warm or hot water from a RX20 with a hard surface attachment, hard surface rotary extraction tool or high pressure hard surface wand. Your portable or Truckmounted extractor should maintain a minimum of 800 psi and a maximum of 1200 psi. For more sensitive surfaces, consider using a hard surface wand or simply mop with clean water and rinse.
  • For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.
  • After the floor has dried, consider the
    need for application of HydraSeal
Key Benefits
  • HydraStone is designed to deep clean and restoratively clean marble, granite, limestone, travertine, slate & sandstone as well as ceramic, porcelain and quarry tile & grout. It also works to effectively dissolve and emulsify stubborn soils on masonry and concrete.
  • HydraStone is designed to be applied as a prespray/pretreatment spray to loosen, dissolve, break down and emulsify built-up soiling, and to assist in stain removal. It is the ideal stone and tile cleaner for stone and tile surfaces that have been affected by smoke and soot damage following a fire or furnace puff-back.
Packaging Sizes
  • 4 X 1 Gallon Case 
Ideal Users
  • Commercial or residential applications 
  • Pre-treat floors being cleaned by an autoscrubber, in a mop and rinse system or used in conjuction with a high pressure/spinner tool system 
Target Markets
  • Applications with ceramic, porcelain, and quarry tile floors and their grout lines
  • Can be used on residential or commercial tile floors and other hard surfaces, indoors and outdoors
  • It cleans porous grout lines without the use of harsh acids.
Product Information