Directions |
- For a floor that has been stripped, properly neutralized, rinsed and allowed to dry thoroughly, apply 5-6 thin coats using a clean synthetic mop. Allow the floor to dry thoroughly between coats and prior to burnishing.
- Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 4 coats of finish.
- For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop.
- Allow floor to dry thoroughly between coats and prior to burnishing.
- Note: Stripped with EnviroStar Floor Stripper.
Keep out of reach of children. Keep container sealed when not in use. Keep from freezing. To avoid possible contamination, do not pour unused product from bucket back into original container.
|